![]() Have you commissioned a true Loxone Smart Home? If so, you’ll effectively receive an addition 3% discount off the list price of all the Loxone components you’ve used in this project. The adjustment is carried out by a gentle dimming up or down the light intensity as pleasant and discreet as possible. In order to avoid excessively unsteady lighting conditions (even flickering), the intensity of the light is not adjusted immediately but over several minutes, responding just as natural daylight would. The difference in lighting intensity between the installation height of the Motion Sensors and the working height is adjusted by a specific correction factor. Controlled by the Loxone Miniserver and depending on the currently prevailing lux values, some 40 DALI Extensions take over the control of the installed lights. 75 cm).įor this purpose, numerous Loxone Motion Sensors first measure the current natural light levels. This ensures a constant light level of 500 lux at the height of the work surface (approx. The lighting of the approximately 600 workstations is controlled by a daylight responsive lighting system. The building is a prize-winning prime example of sustainable building renovation in the Netherlands. Since December 2018, the Dutch “Goede Doelen Loterijen” (in English: “Charity Lottery”) has its headquarters in a renovated industrial building in the south of Amsterdam. Solution: Commissioning daylight responsive lighting. If little or no daylight enters a room, artificial light sources provide an adequate lighting level.ĭaylight responsive lighting is, therefore, the daylight-dependent control of artificial light sources with the aim of maintaining constant levels of light. If sufficient daylight enters a room, little or no artificial light is added. To ensure that the required lux level is as consistent as possible, constant lighting control is used in commercial premises and offices in particular. It ensures that if natural lighting levels are not sufficient, then artificial light sources are brought on to a suitable level to ensure the lux level is maintained. This requirement is usually referred to as daylight responsive lighting. For a VDU workstation, for example, sufficient light is defined as at least 500 lux. ![]() Particular attention is paid to the levels of light. In most of the European countries, the requirements for suitable workplace lighting are defined by European guidelines. Brief: Configure lighting that responds to natural daylight levels. ![]()
0 Comments
Leave a Reply. |